Troy-Bilt 683F Manuel d'utilisateur télécharger pdf (Page 28)

NOTE: All references to left, right, front

and rear of the machine are determined by

standing behind the handlebars and facing

the direction of forward travel.

REQUIRED MAINTENANCE SCHEDULE

Before Every Every Every As

PROCEDURE Each 10 25 30 Noted

Use Hours Hours Hours

Check engine oil level • Every 5

operating hrs.

Clean engine cooling system •

Test operation of Forward Interlock • Section 4

Safety System

Forward Interlock Safety System – •

check wire condition,connections

Check electrical connections •

Recharge battery Before/after

long storage

Check drive belt tension • After initial

2 hours

Check nuts and bolts • After initial

2 hours

Clean tiller tine shaft •

Lubricate tiller •

Change engine oil* • More often

in dusty or

dirty areas

Clean foam element air filter • More often

Check paper element air filter • in dusty or

dirty areas

Check for oil leaks • After initial

2 hours

Check gear oil level in • After initial

both transmissions 2 hours

Check bolo tines for wear •

Check reverse disc for wear •

Check air pressure in tires •

* During engine break-in period, change engine oil after first 2 hours of operation.

Section

Maintenance

Before inspecting, cleaning or

servicing the machine, shut off engine,

wait for all moving parts to come to a

complete stop, disconnect spark plug

wire and move wire away from spark

plug. Remove ignition key on electric

start models.

Failure to follow these instructions

can result in serious personal injury or

property damage.

WARNING

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 59 60

Commentaires sur ces manuels

Pas de commentaire

Troy-Bilt 683F Manuel d'utilisateur Page 28

Commentaires sur ces manuels

Produits connexes et manuels pour Mini-faucheuses Troy-Bilt 683F